Application device

Name: Application device
Brand: Würth
SKU: 08917641

Applicator for disinfectant surface cleaner
SPRAPP-A/C-APPLICATION-AREADESINFECTION

Art.-no. 08917641

EAN 4038898297208

All versions

Similar products

Prices for customers after login

Application device

Art.-no. 08917641

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

For disinfectant surface cleaner. Special cleaning device for fast and reliable disinfection and cleaning.

Robust design

100 percent plastic

Resistant to most chemicals

Notice

The application device can also be used to spray thin liquids into cavities, panels and doors.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

Fill the spray container with disinfectant surface cleaner. Screw the spray gun onto the spray container. Insert the spray hose, with the notch facing downwards, into the gun and tighten by making a 1/4 turn to the right. Connect the spray gun to the compressed air supply. Ideal working pressure: 3–6 bar.

Bin capacity	0.75 l
Max. operating pressure	12 bar
Min. operating pressure	5 bar
Connection thread	1/4 inch
Max. air consumption	180 l/min
Air consumption conditions	at 8 bar
Thread type	Female thread
Material of spring	Steel
Material of lid	POM acetate plastic
Material of bins	Polyethylene
Material of hose	Nylon, polyamide 11
Material of sealing ring	Nitrile rubber

including:

1 x

NPL-PN-BRS-ET-G1/4IN

Quantity: 1 x

1 x

SPRHOSE-(F.SPRAPP-A/C-APPL)

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).