Double-handed grease gun
Double-handed grease gun
DBHNDGRSEGUN-(F.500G SCREW-IN CARTRIDGE)
Register now and access more than 125,000 products
- Can process greases up to NLGI class 2
- Innovative short-stroke technology, i.e. with variable stroke
- 10 mm grease pump piston for fast grease delivery
- With hose holder
- Simple design with vacuum principle
- Ergonomic handle, non-slip, very good power handling
- Permanent check of level and grease type possible
- Quick and clean cartridge replacement
- Environmentally friendly as complete container drainage
Since the piston chamber of the grease gun is not filled using spring pressure, but via the vacuum generated by the piston, the hand lever must not be opened suddenly. Perform even and quick work cycles. Depending on the viscosity (given by NLGI degree and temperature), due to the vacuum principle, a delay time must be observed when the hand lever is open in order to achieve sufficient filling of the piston chamber.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
The short-stroke two-hand grease gun handles 500 g screw-type cartridges for easy and clean lubrication of machines.
- 1. Unscrew the cap from the cartridge. Bleed the cartridge until grease appears.
- 2. Manually tighten the cartridge through the centring ring into the grease gun head of the opened grease gun.
- 3. Press on the follower piston and pump the grease gun until grease appears at the mouthpiece. Repeat the process several times if necessary. Ready to use.
Material | Metal |
Max. operating pressure | 400 bar |
Connection thread | M10 x 1 |
Suitable for | 500 g screwed cartridge |
Length | 350 mm |
Product weight (per item) | 1097.000 g |
Hose length | 340 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Window construction screw, raised countersunk head FBS
LED torch, H20
Air cndtnng srvc. unit, vhcls., spr prt
Fleece Segmented Grinding Disc For direct use on angle grinders
Vehicle battery charger
wSafe® 2000 premium anti-spark PU pneumatic spiral hose
T-handle socket wrench For hexagon head screws
Hose coupling hose piece
Folding mobile scaffolding, complete set Compact, lightweight and strong, stand height 1.55 m
Splitting axe With premium ash handle and wedge for splitting tasks