ASS 18-1/2 inch HT cordless tangential impact wrench
Cordless tangential impact wrench ASS 18-1/2 in HT
IMPWRNCH-CORDL-(ASS18-1/2 HT)-2X5,0AH
Register now and access more than 125,000 products
Max. 610 Nm torque
Limited suitability for replacing tyres, no series screw connections
Overload protection
Minimises the risk of overload damage to machine or battery
Maximum performance with optimal cooling
Four-pole motor with better power distribution than with conventional two-pole motor
Low weight, high performance battery with no memory effect
Lithium-ion technology
Continuous control of the battery capacity
Charge status display on the battery
Impact screwdrivers are not torque screwdrivers. Connections requiring a specific torque must be checked by means of a torque measuring device after tightening with the impact screwdriver.
Datasheets(X)
Wood/chipboard screws, nut tightening, cylinder screws, screw anchors, etc.
Type description | ASS 18-1/2 inch HT |
Min./max. idle speed | 0-1900 rpm |
Min./max. impact rate | 0-2200 rpm |
Max. torque for hard screwing application | 610 Nm |
Suitable for screw | M20 |
Tool holding device | 1/2-inch external square |
Length | 226 mm |
Width | 80 mm |
Height | 260 mm |
Weight of machine with rechargeable battery | 3.1 kg |
Number of rechargeable batteries/batteries | 2 PCS |
Rechargeable battery/battery capacity | 5 Ah |
CHRG-AL60-12/18-AS-LI
BTRYPCK-(LI-AS)-18V/5,0AH
CASEINRT-HNDTL-(ASS 18-1/2IN HT)
SYSCASE-8.4.2.-FOAMADAPT-ORSY200
SYSTEMKOFFERJust leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
All-round paint spray gun AP
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Tyre mounting paste
Compressed air drum pump
Countersunk head screw with recessed head, H ISO 7046-2, steel 8.8, zinc-plated, blue passivated (A2K)
Sealing ring
Needle scaler attachment For pneumatic chipping hammers
Piston ring pliers
Active glass cleaner