Acetate silicone Anti fungus
Acetate silicone wet room Advanced
SILSEAL-ACE-WHITE-0 GRADE-280ML
Register now and access more than 125,000 products
- Good adhesion without primer, e.g. on tiles, glazed ceramic tiles, enamel, polycarbonate glass etc.
- Resistant to ageing, weathering and UV- radiation
- Fungus-Inhibiting
- Resistant to commercially available household cleaners and disinfectants
- No tacky surfaces. Smoothes very well.
- Temperature resistant –40°C to + 100°C.
- Working temperature +5°C to +40°C.
- Touch-dry in approx. 25 min.
- Cures fully at about 2 mm/24 h (23°C).
- Max. long term absorption of movement 20%.
Datasheets(X)
- Edges of the joint must be clean, dry and stable. Pay attention to the dimensions of the joint- see technical datasheet. Treat porous surfaces (e.g. concrete) with primer,Art. No. 0892 170. Smooth before it is touch-dry with sealant smoother, Art. No. 0893 3/ 0893 003
- For connection and expansion joints in bath, kitchen,toilet and swimming pool area. Crystal clear variant
- For sealing in glass, display window, display case and furniture construction. Small-area adhesive bonding as artistic application, e.g. for glass ornaments, glass bricks or adhesive bonding of window bars
Contents | 280 ml |
Colour | White |
Continuous motion absorption | 20 % |
Shore A hardness | 18 |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -40 to 100 °C |
Min. skin-formation time | 25 min |
Conditions for skin-formation time | at 23°C and 50% relative humidity |
Full curing speed/conditions | 4 mm/d / 23°C and 50% relative humidity |
Min. breaking elongation | 100 % |
Fungicidal properties | Yes |
Building material class | B2 - Normally inflammable |
Shelf life from production | 12 Month |
Density/conditions | 0.98 g/cm³ / at 23°C, 50% relative humidity |
Density | 0.98 g/cm³ |
Last viewed
RW-edition blade scraper set 52 pieces
3/4" extension
High-pressure cleaner HDR 160 Compact
Weather sealant Neutral silicone
Decorative trim adhesive tape
Cross cut chisel In line with DIN 6451
Pneumatic impact screwdriver DSS 1/2 inch H
Flat blade fuse ATO ISO 8820-3
Circlip pliers, shape B for shaft circlips
Tyre inflator accessories