Aluminium wheel rim cleaner - RIMCLNR-ALU-SPRAYBOTTLE-500ML

Aluminium wheel rim cleaner

Name: Aluminium wheel rim cleaner
Brand: Würth
SKU: 0890102

Aluminium rim cleaner
RIMCLNR-ALU-SPRAYBOTTLE-500ML

Art.-no. 0890102

EAN 4053479465333

All versions

Similar products

Prices for customers after login

Aluminium wheel rim cleaner

Art.-no. 0890102

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

Acidic special cleaner for light-alloy wheel rims

Contains phosphoric acid

Removes even the most stubborn brake dust deposits, as well as tar splashes and other difficult to remove contamination

Economical to use

Saves time and money

If used regularly, the original appearance is restored. The build-up of new soiling is prevented.

AOX and silicone-free

Notice

Use only on light-alloy wheel rims. Do not use on hot wheel rims or in direct sunlight. Do not spray on vehicle paint, chrome, highly polished aluminium, plastic or other surfaces.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For gentle cleaning of light-alloy wheel rims

Instructions

Spray wheel rims to be cleaned fully and evenly. Particularly with stubborn dirt or rough surfaces, the cleaning effect can be increased by using the Würth hand brush or sponge. Do not exceed the application time of 30 seconds. With unpainted aluminium wheel rims, carry out a thorough material compatibility check in an invisible area.

Contents	500 ml
Weight of content	570 g
Container	Spray bottle
Chemical basis	Phosphoric acid, non-ionic surfactants
Smell/fragrance	Characteristic
Colour	Colourless
pH value / conditions	1 / at 20°C
Min. flashing point	38 °C
Density/conditions	1.14 g/cm³ / at 20°C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes
Free of phosphoric acid	No
Bio-degradable	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.