Brake fluid DOT 3 - BRKFLUD-DOT3-1LTR - 1

Brake fluid DOT 3

Name: Brake fluid DOT 3
Brand: Würth
SKU: 0892009131

Brake fluid DOT 3
BRKFLUD-DOT3-1LTR

Art.-no. 0892009131

EAN 4053479390260

All versions

Similar products

Prices for customers after login

Brake fluid DOT 3

Art.-no. 0892009131

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

For hydraulic brake and clutch systems.

Excellent resisting gas block performance

Ensure the brake safety under high temperature.

Excellent fluidity at low temperature

-40 oC Kinematics viscosity ≦1500 mm2/s

Outstanding corrosion protection

Excellent performance of resisting metal causticity.

Compatible with rubber

Complies with specification SAE J1703; FMVSS116 DOT3；ISO4925and GB12981-2012.

Notice

The brake fluid is easy to absorb moisture from the air, therefore the cap of bottles must be screw down after using it.

The brake fluid can erode the paint of automobiles, therefore the brake fluid do not drop on it and must be wipe immediately if dropping occur.

Stored it in the location of avoiding sunlight 、cool and dryness.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application areaChange brake fluid in accordance with vehicle manufacturer’s instructions. Do not mix with automatic transmission fluids (ATF) or mineral oils.

InstructionsReplace it per year or per 20,000 kilometers

Contents	1 l
Colour	Light yellow
Chemical basis	Polyglycol ether
Shelf life from production	36 Month
Min. wet boiling point	145 °C
Min. dry boiling point	245 °C
Density	1.022 g/cm³
Density conditions	at 23°C
pH value	9.4