Brake fluid tester
BRKFLUDTEST-EL-(DOT3-5)
Art.-no. 071553 205
EAN 4045727890585
Register now and access more than 125,000 products
- Suitable for all standard brake fluids (DOT3, DOT4, DOT4+, DOT5.1, etc.) and new brake fluids
- Powered by the vehicle's own 12 V battery
- Measures temperature up to +320°C through the boiling point process
- Very simple user instructions through the complete test process on the LCD display
- Polarity protected
Brake fluid should be replaced at least every two years, or if the fluid approaches the wet boiling point!
Application Notes: Clean the test tip with water after use
Datasheets(X)
Water absorption (hygroscopicity) lowers the boiling point of the brake fluid. Long braking periods can cause the formation of steam bubbles, leading to brake failure. The most accurate method to monitor the boiling point of brake fluid is to use our boiling point tester. Brake fluid should be replaced if the boiling point is below the recommended minimum temperature.
Last viewed
Elbow pipe wrench Swedish S-jaw form
Hose clamp A4 with asymmetrical lock made entirely of stainless steel
W-100 welding glove
Water pump pliers DIN ISO 8976
Hydraulic shop press
Vehicle battery charger
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot
Writing case with red seams
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with thread up to the head DIN 933, A2 stainless steel, plain