Cooling system tester with inflatable sealing bladder
Cooling system test w. inflatable sealing balloon
CLSYSTEST-BLADDER
Register now and access more than 125,000 products
Inflatable sealing bladder for very high coverage of radiator systems
For radiator coolers or expansion tanks, and bayonet and screw caps
Universal applications for water-cooled engines
For a multitude of motor vehicles
Securing rings for testing on running engines
Safety loops grip around the securing rings and prevent the sealing bladder from slipping out. Blue for VW engines up to 1998, black for VW and Audi engines from 1998 and red for Japanese vehicles
Scope of delivery:
- 1 pressure pump
- 1 spare sealing bladder
- 3 securing rings
- 1 high-quality case
- 1 operating instructions
There is a risk of damaging the sealing bladder on extremely sharp-edged radiator necks. Check radiator neck for sharp edges before insertion.
Datasheets(X)
For testing cooling circuits, radiators, cylinder head seals and water pumps.
1. Insert the sealing bladder into the radiator opening and adjust the safety loops to the aperture beading (if present) using the adjustment wheel.
2. Using the adjustment wheel, adjust the sealing bladder to the corresponding depth of the radiator taper.
3. Inflate the sealing bladder using the pressure pump.
4. Switch the valve over and generate the required test pressure of approx. 1.3 bar in the cooler using the pressure pump.
5. The pressure in the cooling system must not drop by more than 0.2 bar within 10 minutes.
6. After testing the system, release the radiator pressure, switch the valve over, depressurise the sealing bladder and remove from the opening.
Last viewed
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Metal valve 40MSF15.7
Waterproof socket housing TE Superseal 1.5 Series
Open-end slugging wrench metric, straight
Crimp cable lug, round connector PVC-insulated
Vacuum brake bleeder set, 20 pcs
Clay series cleaning sponge
Hearing protection reusable
Triangular file DIN 7261, shape C
Silicone spray