Welcome to Würth Cambodia For trade customers only

Corrosion protection coating Zinc 300

Corrosion protection lacquer Zinc 300
CORRPROTLAC-ZINC300-SPREADABLE-500ML

Art.-no. 0892200
EAN 4053479466194
Prices for customers after login
Corrosion protection coating Zinc 300

Art.-no. 0892200

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Provides permanent protection against corrosion
  • Excellent corrosion protection

  • Quick drying

  • Appearance: Hot-dip zinc-plated


Can be painted over


  • PVC-based paints, acrylate (solvent-based or aqueous) are suitable.

  • Do not paint with alkyd resins (synthetic resin paints) in combination with hot-dip zinc-plated surfaces!

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.


Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Steel construction, shipbuilding, forging, fitter's shops and vehicle construction.


Zinc 300 is suitable for touching up damaged spots on zinc-plated surfaces and welding seams.


Not suitable as zinc-dust primer for heavy-duty corrosion protection.

Instructions

The surface must be clean, dry and free from dust and grease. The layer thickness of the touch-up film should equal 1.5 times that of hot-dip zinc-plating. In addition, the touch-up coating should overlap the hot-dip zinc-plating by at least 1 cm. Consumption: approx. 250-350 g/m per coat.

Contents

500 ml

Weight of content

1045 g

Chemical basis

Fixed metallic zinc dust

Colour

Silver coloured

Conditions for drying time

at 20°C

Min./max. processing temperature

-25 to 40 °C

Max. through drying

3 d

Min. through drying

2 d

Drying time

15 min

Zinc content in the paint

65 %

Zinc content in the dry film

91 %

Purity rating zinc

99 %

Density

2.09 g/cm³

Density conditions

at 20°C

Max. temperature resistance

300 °C

Min. grip strength

45 min

Shelf life from production

12 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information