Cutting disc for steel
Cutting disc for steel
CUTDISC-CN-BLUE-ST-SR-TH2,5-BR25,4-D350
Register now and access more than 125,000 products
- Synthetic resin-bonded, fibrous material-reinforced standard cutting disc
- For free-hand cutting with electric or pneumatic angle grinders
- High break resistance
- Max. circumferential speed 80 m/s
- Storage: Dry, at 20°C room temperature
- Work only with appropriate protective clothing.
- Always use an appropriate protective hood when performing cutting work.
- Only use undamaged discs.
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure.
- Always clamp cutting discs (straight design) with the metal ring facing towards the machine.
Meets the maximum safety requirements in accordance with the EN 12413 European standard.
Datasheets(X)
General structural steels, high-strength structural steels, constructional steels, tool steels, hardened steels
Cutting solid materials, pipes, profiles and metal sheets
Diameter | 350 mm |
Thickness | 2.5 mm |
Drill hole | 25.4 mm |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Ratchet magazine screwdriver with pistol handle Set 1
Body sealing plugs assortment
Pneumatic impact screwdriver DSS 1/2 inch H
Single-pole voltage tester
HSS bimetal cylinder saw
Vehicle dry abrasive paper disc RED PERFECT®
Round socket, uninsulated
Petrol lead substitute For engines with non-hardened valve seats
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain