Welcome to Würth Cambodia For trade customers only

Diesel additive Cetane booster

Diesel additive Cetan Booster
ADD-DISL-(CETAN BOOSTER)-300ML

Art.-no. 5861005300

EAN 4050642912854

Individual price display after login
Diesel additive Cetane booster

Art.-no. 5861005300

Individual price display after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Improves the ignition behaviour of diesel fuels

Clean combustion


Lowers fuel consumption



Boosts the cetane number


The cetane booster improves the ignition qualities of diesel fuels



Lowers emissions and improves cold starting behaviour



Engine noise is also reduced

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Instructions

Add cetane booster directly to the fuel tank. The dosage depends on the cetane number of the fuel used and the required cetane number.

Contents

300 ml

Colour

Clear

Smell/fragrance

Solvent-like

Chemical basis

Hydrocarbon

Shelf life from production

24 Month

Density

0.88 g/cm³

Density conditions

at 20°C

Min. flashing point

65 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove with cotton velour finish inside
Nitrile chemical protective glove with cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information