High-gloss polish P20 Plus - POL-(HIGHGLOSS PLUS)-P20-1KG

High-gloss polish P20 Plus

Name: High-gloss polish P20 Plus
Brand: Würth
SKU: 0893150020

High-gloss polish P20 plus
POL-(HIGHGLOSS PLUS)-P20-1KG

Art.-no. 0893150020

EAN 4046777307573

All versions

Similar products

Prices for customers after login

High-gloss polish P20 Plus

Art.-no. 0893150020

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

Medium-abrasive high-gloss polish for efficient paint preparation

Specifically tailored powder consistency made from aluminium oxide

Moderate surface removal rate and very high gloss level

Effortlessly removes sanding grooves from a grain of P2000 upwards

Thick consistency

Polish does not splash

Economical

Low dust formation

No laborious re-cleaning of adjacent areas

Can be applied manually and by machine

For conventional and scratchproof paint types

Suitable for use on used and new paint surfaces

Silicone-free

Notice

Due to its chemical composition, this polishing agent is safe when used as intended.

In order to achieve an optimum surface without micro-scratches, high-gloss polish plus must not be mixed with other polishes or solvents. Otherwise any warranty is void.

At storage temperatures preferably between 15-25°C, the original containers can be stored for 24 months. Protect containers from frost and direct sunlight during storage and transport.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please refer to the technical data sheet.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Medium-abrasive high-gloss polish for efficient paint preparation, traces of grinding and scratches on used paints, as well as for removing defective areas on hardened repair top coats. Paintwork preparation: Traces of grinding and scratches, refurbishment of used vehicles. Painted surfaces in the automotive, nautical or wood sectors. (solvent-based paints, one-component and multi-component systems, water-based paints, powder paints, scratch-resistant clear lacquers). Not for matt paints.

Instructions

Shake well before use. Moisten the surfaces of the selected polishing disc evenly with the paste and apply a small amount to the surface to be polished. Position the polishing pad flat on the area and start the machine. Apply a certain pressure at 1500-2000 rpm, process the surface until grinding traces or paint imperfections have been removed. Work in sections! Remove residual polish with a microfibre cloth.

Weight of content	1 kg
Chemical basis	Water, hydrocarbon
Smell/fragrance	Characteristic
Colour	Light yellow
Density	1.02 g/cm³
Shelf life from production	24 Month
Silicone-free	Yes

Required accessory:

Product

Description

Quantity

Price
/PU

POLHOOD-LMBWOL-PREMIUM-BLACK-D135MM

Art.-no. 0585135

For economical removal of scratched, dull and partially ground paint areas.

POLHOOD-LMBWOL-STANDARD-WHITE-D135MM

Art.-no. 0585235

For professional polishing work on heavily stressed and weathered paint surfaces.

x 5 pcs

MICROCLTH-PROFI-BLUE-40X40CM

Art.-no. 0899900131

Microfibre cloth for professional maintenance cleaning and vehicle valeting

POLPAD-BLUE-HARD-D145X25MM

Art.-no. 0585027145

Polishing pads in different abrasive grades

MICROCLTH-BASIC-GREEN-40X40CM

Art.-no. 0899900050

Microactive cloth ideal for vehicle valeting and maintenance

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

POLMA-EL-(PM200-E)

MASTER

Art.-no. 07024530

Powerful polishing and burnishing machine in a compact and handy design

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Additive article:

Product

Description

Quantity

Price
/PU

HOLD-BOTTLES-POLISH

Art.-no. 0960046663

Stable support for storing polish bottles

x 1 pcs

POLSPNG-BLACK-L110-W70-H40

Art.-no. 0585300110

Efficient deep cleaning and perfect preparation of painted surfaces for the best polishing results

x 1 pcs

CLNGLOV-HALF-L210-W140MM

Art.-no. 0585300210

Efficient deep cleaning and perfect preparation of painted surfaces for the best polishing results

x 1 pcs

POLCOMPD-200G

Art.-no. 08931571

Synthetic clay used for the removal of spray mist and other contaminants

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.