Industry Clean cleaner - LBLREM-(INDUSTRY-CLEANER)-AEROCAN-500ML

Industry Clean cleaner - LBLREM-(INDUSTRY-CLEANER)-AEROCAN-500ML - 1

Industry Clean cleaner - LBLREM-(INDUSTRY-CLEANER)-AEROCAN-500ML - 2

Industry Clean cleaner

Name: Industry Clean cleaner
Brand: Würth
SKU: 0893140

Industry cleaner
LBLREM-(INDUSTRY-CLEANER)-AEROCAN-500ML

Art.-no. 0893140

EAN 4046777216318

All versions

Prices for customers after login

Industry Clean cleaner

Art.-no. 0893140

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

High-quality special cleaner for removing adhesive tape residue, labels and film stickers as well as stubborn dirt. NSF-certified

Effective

Easy removal of adhesive residues, labels and adhesive tapes

Stubborn dirt such as wax, rubber abrasion, silicone residues, permanent marker, oil and grease are loosened

Gentle on materials, delicate surfaces such as aluminium, brass and stainless steel are not damaged

User-friendly

No unpleasant odours for users and the environment.

Fast and effective cleaning.

Acetone-, silicone- and AOX-free

Notice

Prior to treatment, check rubber and plastic parts for compatibility in an invisible location. Paints may be attacked.

NSF registered, class K3, reg. no. 149620, 149621

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Cleans machine parts, plastic parts and metallic surfaces of adhesive residues. Also suitable for removing protective preservatives e.g. on brake discs.

Contents	500 ml
Colour	Transparent
Chemical basis	Special benzine with D-limonene
Smell/fragrance	Characteristic
Density	0.74 g/cm³
Min. flashing point	10 °C
Shelf life from production/conditions	24 Month / below 25°C
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.