Insect remover

Name: Insect remover
Brand: Würth
SKU: 0893470

Insect remover
INSREM-SPRAYBOTTLE-500ML

Art.-no. 0893470

EAN 4053479465487

All versions

Similar products

Prices for customers after login

Insect remover

Art.-no. 0893470

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

Special cleaner for fast and reliable removal of insect residues on glass, chrome, paint and plastic surfaces

Improved combination of active agents

Easily removes insect soiling that damages paintwork, without leaving any residue

Easy and quick to apply

Also ideally suited for pre-treatment before cleaning in a car wash

Gentle on materials

Does not attack paint, chrome, plastic, rubber etc.

Does not form emulsions with water and therefore does not prevent the use of a light fluid separator (DIN 1999)

AOX-free

Silicone-free

Notice

Do not use on heated paints or in the sun. Protect from frost.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For cleaning windscreen/windows, radiator grilles, bumpers, headlights, licence plates etc. affected by insect residues.

Instructions

Spray the affected surfaces and allow it to take effect for several minutes. Then wipe off the loosened residue with a hard sponge. To prevent scratches, quickly rinse off especially heavy road dirt before actually cleaning the area.

Contents	500 ml
Weight of content	515 g
Chemical basis	Alkaline tenside
Smell/fragrance	Characteristic
Colour	Yellow Green
pH value	11
Min. flashing point	350 °C
Density	1.033 g/cm³
Density conditions	at 20°C
Shelf life from production	36 Month
Conditions to maintain shelf life from production	frost-free storage area
AOX-free	Yes
Silicone-free	Yes
Bio-degradable	Yes
Container	Hand spray

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.