Multigrade compressor oil
Multi-grade compressor oil
COMPROIL-MULTIPURPOSE-1LTR
Register now and access more than 125,000 products
Compatible with following refrigerants: R 23, R 125, R 134a, R 227, R 413a, R 407c, R 410a, R 404a, R 507, R 744.
Can be mixed with PAG oil and ester oil
One oil for all applications
Excellent lubrication effect.
- Longer compressor service life
- High level of refrigerant compression in the compressor
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For universal maintenance and lubrication of vehicle air-conditioning compressors in the coolant circuit
Top up low compressor oil according to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit
Contents | 1 l |
Chemical basis | Mixed synthetic mineral oil |
Smell/fragrance | Odourless |
Colour | Light yellow |
Density | 0.965 g/cm³ |
Density conditions | at 20°C |
Kinematic oil basis viscosity | 64.3 mm²/s |
Conditions for viscosity of oil basis | at 40°C |
Melting point | -45 °C |
Min. flashing point | 250 °C |
Water-soluble | No |
Last viewed
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
High-pressure cleaner HDR 185 Power Plus
O-ring, metric
PE steering wheel protector on roll
Empty box For DIN 338 twist drill bits
1/4 inch socket wrench insert, metric short
Freezer spray
Hand cleaner in tub
Cone grease nipple Angled shape 45°, DIN 71412 shape B, zinc-plated steel
O-ring, metric