Multigrade compressor oil Pro

Name: Multigrade compressor oil Pro
Brand: Würth
SKU: 0892764123

Multi-grade compressor oil Pro
COMPROIL-MULTIGRADE-PRO-1000ML

Art.-no. 0892764123

EAN 4058794663990

All versions

Individual price display after login

Multigrade compressor oil Pro

Art.-no. 0892764123

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

High-value synthetic oil with additive specifically tailored for use in air-conditioning compressor technology

Compatible with following refrigerants: R-23, R-125, R-134a, R-1234yf, R-227, R-413a, R-407c, R-410a, R-404a, R-507

Can be mixed with PAG oil and ester oil

Excellent lubricating effect

Longer compressor service life

High level of refrigerant compression in the compressor

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

For universal maintenance and lubrication of vehicle air-conditioning compressors in the refrigerant circuit. Suitable for refrigerants R-134a, R-1234yf and other HFC and HFO refrigerants. Suitable for all cars, trucks, buses and agricultural machines equipped with R-134a or R-1234yf air-conditioning systems.

Instructions

Top up low compressor oil according to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit.

Contents	1000 ml
Chemical basis	Phosphate
Density	0.979 g/cm³
Density conditions	at 20°C
Kinematic oil basis viscosity	85 cSt
Conditions for viscosity of oil basis	at 40°C, in accordance with ASTM D-445
VOC concentration (CH)	0 %
Min. flashing point	282 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.