Paint finish assortment
Paint finish assortment
POL-KIT-LACQUERFINISH-ASSORTMENT
Register now and access more than 125,000 products
Innovative, aluminium oxide-based polishes
- Outstanding removal rate
- Very quick to work on defective areas
- High degree of gloss
- Universal use on all commercially available top coat paint systems
Latest polish generation
Working with state-of-the-art technology.
Assortment
Ideally suited for mobile use.
Contents:
- 2 professional vehicle polishes (P10 + P30)
- 250 P2000 abrasive polishing plates (rip tape) used for removing dust inclusions and fine surface defects
- 1 sanding block set (sanding block, soft interface, abrasive polishing disc moistener)
- 5 P2000 automotive finishing discs for matting surfaces
- 2 orange sanding pads, ∅ 85 mm
- 1 blue sanding pad, ∅ 85 mm
- 1 pneumatic polishing machine with speed control
- 1 adhesive plate (rip-tape), ∅ 75 mm
With a dry polishing pad, apply a little more polish. Remove the polish residue with a microfibre cloth. Proceed in sections.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For professional removal of paint mist, paint transitions and defective areas in freshly painted or hardened top coats. Vehicle preparation. Surface finish.
Shake the polish well before use. Apply a few drops of the polish to the polishing pad and a small amount to the object to be treated. Apply the polishing pad to the object and spread it manually onto the surface to be polished. Then start the polishing machine and, applying gentle pressure at 1500–2000 rpm, process the surface with even movements until the required result has been achieved.
SMLEMRYDISC-HOKLP-2000
POLPAD-ORANGE-SOFT-D85
POLPAD-BLUE-HARD-D85
FM-(F.POLDISC-05860180)-SFT
SNDBLOCK-KIT-2PCS
ADHDISC-HOKLP-M6-WO.HO-D75
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Plug-in nipple Series 2000
Copper paste CU 800
Indicator and brake light bulb H21W
Halogen bulb
O-ring, metric
Pneumatic eccentric disc-type sander DTS 151 C
1/2 inch socket wrench insert metric, hexagon, short
Reversible ratchet 1/2 inch With lever reverse
Rubber blade refills, cars For car frame windscreen wipers
O-ring, metric