Plastic T-connector
Plastic T-plug-in connectors
QCKPLGCON-(T-CON)-PLA-D6MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 6 mm |
Outer diameter (G) | 10.5 mm |
Distance from centre of pipe to end of T-piece (L/2) | 17.5 mm |
Length (L) | 35 mm |
Height (H) | 22.5 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Steel |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
Window construction screw self-drilling raised countersunk head FEBOS®plus Steel, zinc-plated, blue passivated, PH drive
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 8.8, plain, with full thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Jack stands
1/4 inch socket wrench insert, metric short
Brake fluid tester
Hand tap, taper tap HSS DIN 2181
Metric double box-end wrench Hexagon with POWERDRIV®
HSSCo8 bi-metal long-life & speed cylinder saws assortment
Water pump pliers