Plastic angle connector
Angle connector plastic
QCKPLGCON-(ANGL-CON)-PLA-D8MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (T) | 8 mm |
Length (L) | 29.5 mm |
Material of housing | Plastic |
Material of gasket | Nitrile |
Min./max. temperature conditions | -20 to 80 °C |
Max. operating pressure | 20 bar |
Last viewed
Valve extension caps
Circlip pliers, shape B for shaft circlips
Base plate for square-perforated panel system
Vehicle battery charger 15 A
1/2" socket wrench insert For TX screws, short
O-ring, metric
Hammer drill bit Plus Duo-S Vario
Pin punch In accordance with DIN 6450 form C with hardened impact head
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe