Plastic angle connector
Angle connector plastic
QCKPLGCON-(ANGL-CON)-PLA-D8MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (T) | 8 mm |
Length (L) | 29.5 mm |
Material of housing | Plastic |
Material of gasket | Nitrile |
Min./max. temperature conditions | -20 to 80 °C |
Max. operating pressure | 20 bar |
Last viewed
Double open-end wrench
Engine oil TRIATHLON® Endurance III 5W-30
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Rust remover Rost-Off
Engine oil TRIATHLON® Universal SAE 15W-40
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Central lubricating system filler hose With central lubricating system universal connection
Snipe nose pliers DIN ISO 5745
Metal bow saw
Special 2C adhesive set 5 pcs