Plastic plug-in connectors
QCKPLGCON-CHANNEL-STRAIGHT-PLA-D8MM
Art.-no. 088501 08
EAN 4011231816182
Register now and access more than 125,000 products
- Operating temperature: -20 °C to +80 °C.
- Max. permissible operating pressure: 20 bar.
All pipes, regardless of material, tend to vibrate and move once they reach a certain length. For this reason, secure the brake line pipes (diameter 5 to 16 mm) to the bodywork or chassis with rubberised pipe clamps where possible. Maintain clamp spacing of 1 m to maximum 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-action connector while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Removal:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 8 mm |
Outer diameter (G) | 13.5 mm |
Length (L) | 38 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Plastic |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
Multiblade jigsaw blade, construction, three stars for wood with nails, thick and thin sheet metals
Halogen bulb
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
1/2 inch socket wrench insert metric, hexagon, short
Self-adhesive fusible layer
VDE screwdriver, flat slotted
Cap and hat
Vehicle cable FLRY
Storage box
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain