Quick Fresh Active air-conditioning disinfection - DEODOR-(QUICK FRESH ACTIVE)-100ML

Quick Fresh Active air-conditioning disinfection

Name: Quick Fresh Active air-conditioning disinfection
Brand: Würth
SKU: 0893764650

Vehicle air conditioner cleaner Quick Fresh Active
DEODOR-(QUICK FRESH ACTIVE)-100ML

Art.-no. 0893764650

EAN 4065233071384

All versions

Similar products

Individual price display after login

Quick Fresh Active air-conditioning disinfection

Art.-no. 0893764650

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

For quick and effective removal of odours and bacteria in indoor and vehicle air conditioning systems

The air-conditioning unit cleaner is reliable at fighting unpleasant odours caused by bacteria in the air ducts of air-conditioning units and in vehicle interiors

Antibacterial silver ions prevent further odour with their disinfecting effect

User-friendly

Disinfectant effect by antibacterial silver ions

Long-lasting fresh scent

No laborious disassembly work on the evaporator and interior

No additional manual for specific work steps required

Effectiveness confirmed independently

Easy to use

Notice

No persons are allowed inside the vehicle during application.

All electrical devices must be switched off during application. Avoid ignition sources. Ventilate the vehicle well for several minutes after use. Do not smoke inside the vehicle straight after application. Use only one can per application. Preliminary tests are essential before use, especially on light surfaces.

Preliminary tests are essential before use, especially on light surfaces. Take care when using products containing biocides. Always read the label and product information before use.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Effectively removes odours from vehicle interiors and air-conditioning systems in vehicles. Thanks to the improved Quick Fresh Active formula, you can reliably reduce unpleasant odours caused by bacteria in air ducts of air-conditioning units and in vehicle interiors. Antibacterial silver ions prevent odour formation, also protecting against allergic reactions. Quick Fresh Active leaves behind a long-lasting fresh fragrance.

Instructions

Do not allow anyone to be inside the vehicle during use. All electrical equipment must be switched off during use. Avoid ignition sources. Ventilate the vehicle well for several minutes after use. Do not smoke inside the vehicle straight after application. Use only one can per application.

1. Switch off the air-conditioning unit and activate recirculation

2. Set ventilation to maximum and select a cold temperature level for the interior

3. Shake can well before use

4. Position the can in the footwell and activate the spray head. Keep doors and windows closed during application (approx. 2 min.). Make sure that the spraying jet (90-150 cm) does not reach, for example, the lighting and sliding roof control elements and the display, radio, navigation, etc.

5. Remove excess substance immediately with a damp cloth

6. Ventilate the vehicle well after use

Chemical basis	Water and alcohol
Contents	100 ml
Weight of content	76 g
Smell/fragrance	Lemon
Colour	Transparent
Density	0.77 g/ml
Min. flashing point	-42 °C
AOX-free	Yes
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.