Repair hose line, NBR/CR With medium permeation for non-fuel-carrying applications
Repair hose line with medium permeation
REPHOSELNE-2A-UPPERRUBBER-BLCK-D5,5X11,5
Register now and access more than 125,000 products
- Material: NBR/CR
- Medium permeation of fuel vapours
- Oil and acid-resistant outer elastomer layer for protection against abrasion, ozone and weathering
- Medium heat resistance
- Complies with EU End-of-life Vehicles Directive
- Flexible
Due to the addition of renewable raw materials in commercially available petrol and diesel fuels and increasingly high operating temperature ranges, Type 2A hoses are not recommended for use in fuel-carrying applications in motor vehicles. Observe the manufacturer's specifications.
Please note that the manufacturer's specifications must be complied with with regard to the operating temperature for high-performance engines subject to high temperatures.
For production-related reasons, the hoses are not always delivered in one piece. For 15 m max. 3 pieces, for 10 m max. 2 pieces.
Not suitable:
- For use in fuel-carrying applications
- For use in fuel tanks
- For gear and engine oils
Datasheets(X)
Suitable for use in motor vehicles as a fuel-tank overflow line/engine vent line or vacuum hose.
Internal diameter (ID) | 5.5 mm |
Outer diameter (AD) | 11.5 mm |
Colour | Black |
Min. temperature conditions | -35 °C |
Max. temperature conditions | 90 °C |
Length | 15 m |
Max. operating pressure | 10 bar |
Testing pressure | 20 bar |
Last viewed
Petrol fuel injection valve cleaner LBW 400
1/4 inch + 1/2 inch tool assortment 109 pieces
Cordless radio set
Valve setting rings assortment 60 pieces
1/4" socket wrench insert metric, long
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Jack stands
1/2 inch socket wrench insert metric, hexagon, short
Gas filter for half face mask HM 173
Ring bolt DIN 580, material: C15 E, zinc-plated steel, blue passivated (A2K)