Repair resin Crack Fill For star-shaped impact (vis 40 cps)

Name: Repair resin Crack Fill For star-shaped impact (vis 40 cps)
Brand: Würth
SKU: 0890012

Repair resin, Crack Fill
REPRSN-WNDWREP-(CRACK FILL)

Art.-no. 0890012

EAN 4056807054438

All versions

Prices for customers after login

Repair resin Crack Fill For star-shaped impact (vis 40 cps)

Art.-no. 0890012

Prices for customers after login

Quantity

x 10 pcs

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

Repair resin for the repair of stone chips in windscreens

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Chemical basis	Methacrylate
Weight of content	0.4 g
Smell/fragrance	Mild
Colour	Colourless
Min. flashing point	100 °C
Density	1.01 g/cm³

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.