Rust remover Rost-Off

Name: Rust remover Rost-Off
Brand: Würth
SKU: 0890200

Rust remover Rost Off
RUSTREM-(ROST-OFF)-300ML

Art.-no. 0890200

EAN 4046777561425

All versions

Similar products

Prices for customers after login

Rust remover Rost-Off

Art.-no. 0890200

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 023 885171

High-quality rust remover

High capillary activity

Optimum creeping properties produce a high degree of rust penetration, i.e. even stubborn, rusted-on screw connections are removed

Optimum rust removal

Penetrates rust and loosens seized screws and bolts

Excellent water displacement

Displaces and penetrates moisture, e.g. in the case of contact difficulties

Corrosion protection additives for optimum corrosion protection

Provides lasting protection against further corrosion

Resin- and acid-free

Silicone-free

Compatible with rubber and seals

Notice

This information is only a recommendation based on our experience. Check material compatibility on an invisible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For releasing rusty and oxidised screw connections on passenger cars, lorries, agricultural and construction machinery, assemblies and devices

Instructions

Spray the parts to be treated and allow to take effect briefly. With stubborn connections, repeat application and extend soaking time where necessary.

Contents	0.3 l
Container	Aerosol can
Min. temperature conditions	-10 °C
Max. temperature conditions	140 °C
Kinematic oil basis viscosity	16.5 mm²/s
Conditions for viscosity of oil basis	at 40°C
Chemical basis	Mineral oil
Silicone-free	Yes
Shelf life from production	24 Month
AOX-free	Yes
Resin-free	Yes
Acid-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.