Separator
Separator tool
SEPRTL-SPNW115MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 22-115 mm |
Width of clamping jaw (B) | 170 mm |
Spindle length (C) | 250 mm |
Min./max. hole distance (E) | 115-208 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M14 x 1.5 |
Last viewed
Single wire seal (SEAL) For uninsulated cable connector
Hose clamp pliers
Triangular file DIN 7261, shape C
Wire stripping pliers, adjustable
2-way blow-out gun With a control button for the infinitely variable adjustment of air flow
Double ring spanner Metric
Filling system REFILLO®
Rust converter
Window construction screw, raised countersunk head FBS
Drill hole marker For marking where access is restricted