Welcome to Würth Cambodia For trade customers only

Vehicle battery charger 30/15 A

Motor vehicle battery charger 30/15 A
CHRG-BTRY-VEH-12/24V-30/15AMP-XL-LED

Art.-no. 077230 15
EAN 4049557522937

Prices for customers after login
Vehicle battery charger 30/15 A

Art.-no. 077230 15

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Integrated temperature sensor at the charging terminals ensures that the battery is charged in a controlled and gentle manner. 12/24 V.

Combines 12-V and 24-V applications in a single device



The integrated temperature sensor at the charging terminals ensures that the battery is charged in a controlled and gentle manner.



Protected in accordance with IP30



Features a 30-A supply mode


that keeps the battery fully charged even during maintenance and diagnostics work.



Due to its compact design, this charger is also ideal for use in showrooms



Standard charging


For conventional batteries (wet batteries, open design), maintenance-free batteries, gel and closed batteries



Cold charging function


Used when the battery temperature is lower than 5°C and for AGM GEL batteries



Boost function


Intensive mode for deeply discharged batteries



Supply mode


Used as a power supply in the showroom or during maintenance work



Integrated battery tester


4-stage LED display



Multifunctional holding device


Various operating positions are possible thanks to the integrated holding device (standing, hand-held, hanging and wall-mounted — all possible with the same holding device)

Notice

Please note that the spark protection feature will not function in supply mode.

RoHS, REACH, EMV, CE

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Recommended for battery capacities between 90 and 600 Ah.

Instructions

Test (Display: "Battery full" LED flashes)


This mode checks the vehicle battery for damage.



Gentle charging (Display: "Discharged" LED flashes)


This mode is selected for deeply discharged vehicle batteries. In this mode, the vehicle battery is prepared for "normal charging".



Desulphurisation (Display: "Low" LED flashes)


This mode is selected following a longer break in operation of the vehicle battery to desulphurise it by means of pulse charges.



Normal charging/intensive charging (Display: "Low" LED flashes)


This mode charges the vehicle battery via a continuous flow of current until the battery is charged to 85% of its capacity.



Absorption (Display: "Battery full" LED flashes)


This mode charges the vehicle battery at a constant voltage (normal charging: 14.0 V/cold charging: 14.4 V) until the battery is charged to 98% of its capacity.



Recharging (Display: "Battery full" LED flashes)


In this mode, the remaining 2% of capacity before the battery is fully charged is charged at a higher voltage (normal charging: 14.4 V/cold charging: 14.8 V) and a lower current to protect the vehicle battery.



Test (Display: "Battery full" LED flashes)


If the voltage of the vehicle battery drops to 11.6 V within ten minutes, the battery is considered defective and must be replaced.



Maintenance (Display: "Battery full" LED is constantly illuminated)


This mode conducts continuous voltage measurements at 12.6 and 25.2 V. If the voltage drops, the charging process is restarted.



Intensive mode (Display: "Discharged" LED flashes)


This mode is used for rapid charging and for deeply discharged vehicle batteries. The vehicle battery is intensively charged at the maximum current for 30 minutes and then tested to ensure that it is possible to proceed with normal charging. If the battery voltage is still insufficient, intensive charging is continued. This process is repeated a maximum of four times. If this is not sufficient to charge the battery, the charger displays an error.

Frequency

50 Hz

Min. charging voltage

12 V/AC

Max. charging voltage

24 V/AC

Min./max. rechargeable battery/battery capacity

90-600 Ah

Battery designation

12 V lead-acid batteries (open, MF, calcium, VRLA, GEL, AGM fleece)

Charging characteristics

7-step fully automatic charging characteristic

IP protection class

IP 30

Cable length

1800 mm

Fully insulated charging terminals

Yes

Cable cross section

4 mm²

Length x width x height

230 x 118 x 70 mm

Product weight (per item)

1920 g

Included in delivery

Fully insulated charge clamps with integrated temperature sensor

Spark protection

Yes

Reverse-polarity protection

Yes

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Lithium button cell 3 V

RDCLL-LITHIUM-CR1620-3V

Low level of self-discharge
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information