Warning adhesive tape, non-slip, aluminium-laminated
Warning adhesive tape, non-slip, mouldable
WARNTPE-SA-NONSLP-ALU-YELL-BLACK-50MMX6M
Register now and access more than 125,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- Aluminium-laminated for good formability
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Slip-resistant indoor and outdoor marking of profiled surfaces, such as corrugated plates and non-slip warning marking for hazard points such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Colour | Yellow-black |
Suitable for use in the following materials | Concrete screed |
Area of application | Outdoors |
Min./max. temperature conditions | -23 to 65 °C |
Min. processing temperature | 12 °C |
Material | Aluminium |
Adhesive base | Acrylate |
Last viewed
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Double open-end wrench assortment
Sealing ring
Bond and Seal structural adhesive
Microfbre cloth, professional
Thread die HSS DIN EN 22568 for metric ISO fine threads
O-ring, metric
Diesel performance improver
Dispenser For adhesive-free latex-free plasters
3/8 inch socket wrenches Assortment of 16 pieces