Warning adhesive tape, non-slip, aluminium-laminated
Hazard warning adhesive tape non-slip mouldable
WARNTPE-SA-NONSLP-ALU-YELL-BLACK-50MMX6M
Register now and access more than 125,000 products
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- Aluminium-laminated for good formability
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- Yellow-black tape for permanent hazard points and obstacles
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Slip-resistant indoor and outdoor marking of profiled surfaces, such as corrugated plates and non-slip warning marking for hazard points such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | Aluminium |
Adhesive base | Acrylate |
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Min./max. temperature conditions | -23 to 65 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Last viewed
Structural adhesive POWER NAIL
Halogen bulb
Ball joint puller, drop-forged
Microfibre cloth BASIC
3/4" POWERDRIV® socket wrench insert metric, hexagon
Screwdriver PZ short with round shank
Cross cut chisel In line with DIN 6451
Cutting protection glove CUT 4/200 with Kevlar®
ORSY®clamping pins (sleeves), assortment of 100
Recoil-free soft-face hammer, 5 kg