Warning adhesive tape, non-slip, standard
Hazard warning adhesive tape self-adh. non-slip
HAZDWARNTPE-SA-NONSLP-YELL-BLACK-50MMX6M
Art.-no.
081244 672
EAN 4056807861043
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Non-slip reflective tape for hazardous areas in indoor and outdoor areas, such as the edge of steps and ramps, working areas, lifting platforms, workshop pits and wet areas.
- Self-adhesive
- For medium to high loads
- Prevents slipping and falling accidents
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
Notice
- Yellow-black tape for permanent hazard points and obstacles
- The butyl primer should be used outdoors. This significantly increases the adhesive strength of an adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Product information
Datasheets(X)
Application area
Non-slip warning marking for hazard points indoors and outdoors, such as stairs and ramp edges, work areas, lifting platforms, workshop pits, wet areas.
Colour | Yellow-black |
Material | PVC - Polyvinyl chloride |
Adhesive base | Acrylate |
Length | 6 m |
Width | 50 mm |
Thickness | 1 mm |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |