Wiggle wire
Wiggle wire
WGLWRE-DRSW
Register now and access more than 125,000 products
Wiggle wire enables you to pull at multiple pulling points simultaneously
Typical peak stresses do not occur which prevents sheet metal from tearing and bumps from forming.
Total length 360 mm x 50 pcs. = 18 m. Wire thickness: 2 mm
Bend the wiggle wire slightly beforehand so that only a single curve comes into contact with the sheet metal during welding. It is advisable to weld every curve. Always weld towards the transformer earth, not the other way around.
 | |
Length | 360 mm |
Wire diameter | 2 mm |
Product weight (per item) | 12.700 g |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Passenger car rubber valve, Snap-In
Double open-end wrench
Battery-powered hammer drill H 18-MA
Clay series cleaning sponge
O-ring, metric
Bond + Seal structural adhesive
Engine oil TRIATHLON® Universal SAE 15W-40
Combination wrench, angled
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
3/4" cardan joint