Plastic angle connector
Angle connector plastic
QCKPLGCON-(ANGL-CON)-PLA-D6MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (T) | 6 mm |
Length (L) | 22.5 mm |
Material of housing | Plastic |
Material of gasket | Nitrile |
Min./max. temperature conditions | -20 to 80 °C |
Max. operating pressure | 20 bar |
Last viewed
Visual anti-freeze and battery acid tester
Black NBR70 round cord
Metric double box-end wrench with POWERDRIV®
Twist drill bit HSCo DIN 338 type RN oxide
Polishing machine EPM 2000-7
Crimp cable lug, blade connector PVC-insulated
Double open-end wrench
Monier pliers DIN 5242
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
O-ring, metric